Thods working with Decanoyl-L-carnitine Technical Information hydrate dissociation, namely the depressurization hydrate production thermal stimulation utilizing hydrate dissociation, namely the depressurization method, thermal stimulation hydrate dissociation, namely the depressurization method, thermal stimulation utilizing and gas-swapping or inhibitor-injection strategy. Inside the depressurization technique, method technique and gas-swapping or inhibitor-injection system. Within the depressurization method, technique and gas-swapping or inhibitor-injection system. In the depressurization technique, reservoir pressure is reduced to dissociate the gas hydrate under the phase boundary. reservoir pressure is reduced to dissociate the gas hydrate below the phase boundary. This reservoir pressure is decreased to most economical when in comparison with the other procedures. This approach would be the simplest and dissociate the gas hydrate beneath the phase boundary. process is the simplest and most economical when compared to the other solutions. The This reservoiris the simplest and most economical when in comparison to by injecting hot fluThe system temperature is improved to destabilize the gas hydrate the other techniques. reservoir temperature is enhanced to destabilize the gas hydrate by injecting hot fluids or The or direct electrical heating inside the thermal stimulation gas hydrate by injectingeconomids reservoir temperature is elevated to destabilize the process. Having said that, it’s hot fludirect electrical heating in the thermal stimulation process. However, it truly is economically ids or direct electrical heating within the thermal stimulation method.temperature of economically unfavorable, because the power amount to boost the However, it truly is hydrateunfavorable, since the Bomedemstat Purity & Documentation energy quantity to increase the temperature of hydrate-bearing ically unfavorable, becauseis exceptionally amount to raise the temperature of hydratethe energy bearing sediments is extremely high. In high. Within the gas-swapping or inhibitor-injection sediments (HBSs) (HBSs) the gas-swapping or inhibitor-injection strategy, bearing sediments (HBSs) is equilibrium (dash line) is acquired by the inhibitor-injection exceptionally high. Within the gas-swapping or approach, new phase equilibrium (dash line) is acquired by the injection injection of gas or new hydrate hydrate phase of gas or inhibitor, strategy, newillustrated in Figure 2. Methane gas in hydrate is replacedinjection of gas or inhibitor, as hydrate phase equilibrium (dash line) is acquired by theinjected gas, and it as illustrated in Figure two. Methane gas in hydrate is replaced with with injected gas, inhibitor, released. As an example, CO2 might be gas into displace replaced with injected gas, hydrate is methane from the hydrate and it’s as illustrated in Figure two. Methane to displace methane in the hydrate even though is released. For example, CO2 can be used used and it being trapped ashydrate. CO2 is usually used tohydrate formation can resultresult in For CO2 hydrate. However, the displace methane from the in porewhile is released. CO instance, Having said that, the CO CO2 hydrate formation can hydrate being trapped as 2 2 though beingclogging, as CO2 hydrate. Nonetheless,decrease2 of porosity permeabilityresult[8]. pore-space trapped followed substantial decrease of porosity and and permeabilityThis space clogging, followed by a by a substantial the CO hydrate formation can [8]. in pore-space clogging,to serious lossaof hydraulicdecrease of porosity and permeability [8]. This phenomenon results in severe loss of hydraulic conductivity. Ultimately, injecting inhibip.